fossilesque@mander.xyzM to Science Memes@mander.xyzEnglish · 25 days agosafety firstmander.xyzimagemessage-square22fedilinkarrow-up1310arrow-down19
arrow-up1301arrow-down1imagesafety firstmander.xyzfossilesque@mander.xyzM to Science Memes@mander.xyzEnglish · 25 days agomessage-square22fedilink
minus-squareMeowZedong@lemmygrad.mllinkfedilinkEnglisharrow-up15·edit-225 days agoHow dare you not share the reference in a link too! The CaCO3 concentration where boiling was most effective (>80% of the measured polymers removed) was >120 mg/L. This is hard water, so if your local area doesn’t have particularly hard water, this method won’t be effective. A very general guide for the US on hard water levels by state.
minus-squareblackbrook@mander.xyzlinkfedilinkEnglisharrow-up2·25 days agoso that suggests you may need to add calcium carbonate to your water first.
minus-squareMeowZedong@lemmygrad.mllinkfedilinkEnglisharrow-up1·25 days agoYes, we just need to install water hardener systems rather than softeners to boil out the plastics! I’m curious how effective typical household water filtration systems are in comparison. I’d expect RO systems would be effective at least.
How dare you not share the reference in a link too!
The CaCO3 concentration where boiling was most effective (>80% of the measured polymers removed) was >120 mg/L. This is hard water, so if your local area doesn’t have particularly hard water, this method won’t be effective.
A very general guide for the US on hard water levels by state.
so that suggests you may need to add calcium carbonate to your water first.
Yes, we just need to install water hardener systems rather than softeners to boil out the plastics!
I’m curious how effective typical household water filtration systems are in comparison. I’d expect RO systems would be effective at least.