True, though they are more common than you think, there’s still thousands of flights daily across the U.S. and where I live its the only mode of transportation in/out of a lot of communities. On thing that’s common though is a mod to allow the planes to run on car gas, 85 or better octane. That helps us and them (much cheaper) and a lot of modern small aircraft are moving to diesel piston engines like the Thielert engines.

And its still not entirely banned in the US, AVGAS for small planes is a “low” lead fuel that still contains a decent amount of lead.

You used to need GlovePie to set it all up, but I think Dolphin has a driver built in now. You pair the controllers to a PC the same as the console but it was more finicky last time I tried than the pair to console process

I was mostly thinking of the handgun builds I’ve seen with hand made slide rails but the rest is just a Glock(or whatever else base gun) parts kit for everything else.

Most 3d printed guns are constructed very similarly to “real” commercially available (in burgerland) guns that use a polymer construction. The plastic is taking very little of the force, they use metal inserts and rails that the mechanical parts connect to. This distributes the load a lot. I haven’t printed any yet, mostly because you basically need to buy a whole gun to build one, but they aren’t magic or anything and you could do the same thing with woodworking tools by hand if you had a lot of patience.

I usually keep 1 or 2 PLAs in there, one tough material like ASA and one silly fun one. Let’s me just select the right mats for the job and hit print and I rarely have to change out a spool unless I’m doing something colorful. It’s awesome

If you want to print with high temp materials the enclosure is a must, so it’s a huge change there, if all you do is PLA, PETG then it’s not as critical. But I still think the Bambu P1S bundle is the better deal, similar sized printer, similar motion system and ease of use, and you get the 4 spool AMS which is a game changer even if you don’t print multicolor. I want to love the prusa stuff but it’s just too expensive

The total cost of the upgrades to go from MK3S>MK4>CORE One is the same or greater than just buying a new kit. It’s currently $1-200 more than a Bambu P1S with AMS due to the black Friday sale, which they frequently have on sale for this price. I really do like the concept of continually upgrading your printer to the latest and gratest, but it’s not actually that economical. And add to all that, you’ll basically end up with a new printer and most of the parts of a second so why not just have 2 for the same cost.

If you have the hardware for it, you can set up moonlight and sunshine and make your own open source cloud gaming setup. I’m getting very close to moving my primary desktop into a server case and putting it in my rack and setting up a thin client for access at my desk. I have easy access to my steam library and can stream 4k in my home with very low latency, and it can do 1080p over a mobile connection

They never will because then they would need to give valve a cut for the micro transaction purchases made in the ubisoft launcher. Also they lose that advertising platform

They meant you see video evidence of it on YouTube, not go yourself.

Breaking news ground here Capernicus

While I can’t say I’ve paid more for less as a whole, I’ve definitely had a higher fun to dollar with SC than many other more finished, flashier games. It’s what you make of it and the people you meet along the way, just like any other MMO. It definitely has its warts and issues, but I think a lot of people also hate it because they were told it was bad and evil and I don’t think that’s really true. It has the trappings of any large game service products which people call greedy but it does cost a lot to run. I think a lot of the criticism boils down to that’s a lot of money and not a lot of fast progress, and that’s fair but this game is also unique in being public from a far too early point of development and many other games with smaller scopes are just as slow when developing a new engine/IP (relative to the scope) but the public doesn’t see much until we get to just about this point in development.

Either trueNAS or unraid work as a vm in Proxmox, but there’s some caveats. You have to pass the whole hba/lsi pcie device to the vm so you can’t split the backplane of the server.

Yep, only played 2 hours so far but it’s been enjoyable.

Those don’t seal well, so probably not

Aircraft maintenance has been doing the negative pressure unlock tests on cockpit doors for decades, its honestly surprising what isn’t common knowledge. Like others have said, rapid decompression of only a portion of the aircraft is very bad, and will result in massive structural failure as individual compartments aren’t pressure rated and will blow apart. The doors I’ve had experience with had large panels that would pop out when in a negative pressure event.

I had to do a double take, I have almost exactly copy of that cat tree and 2 voids, a short and long haired one. Was starting to wonder where my third cat came from. Good looking kitty friends, and they seem very happy with the new perch

I can’t speak to the all in one dream machine, though I’m sure it’s similar in capability to my UDM pro, which has been fairly solid for me and only really has had trouble when I induced it myself. It’s definitely much more complex and open than most home routers, and allows you to set every single thing you can think of, the drawback though is that it’s not as automated as some home routers and you need to know what you are setting more in depth when you step off the auto modes. Overall I’ve been very happy with my unifi setup. I also use Protect and I’m looking to set up Access too soon(ish).