Haven’t read so can’t tell you but you will find info at https://leminal.space/post/11699480

Cura can ignore what’s below buildplate as long as part isn’t too big for X Y axes. For cutting this, I would use 3d builder. Very easy to use. Just open model, and go to modify to cut model

Can second that email works great to send Epub, never had issues in years

While turning down temperature might help as it will be less fluid, i tend to think that increasing retraction might give him other problems (unless is settings are really low). On pictures we only see stringing at the top where printing areas are very small which means much more retraction are needed. His issue could be related to maximum retraction count and/or minimum extrusion distance, when those numbers are reached, printer will not retract filament to protect grinding too much filament. Others parameters to look out are retraction speed and prime speed but since OP didn’t share settings, no way to tell what he could try.

To OP, please share your printing settings.

I have used darktable, but doesn’t seem to fill your need as it is more a lightroom replacement than Photoshop https://www.darktable.org/

Thanks mate, did make a mistake…

Might post later about my A1 as I have a question that will fit here.

Home assistant has a voice assistant but it isn’t a voice assistant. Also, you are correct it is made to control a smart home (at the moment) that also include music threw external provider (or local files) but you can’t search the internet threw it. You can either install it locally or pay for home assistant subscription which include voice assistant threw cloud.

I’m not 100% sure but this might also depend which OS you are running on your pi. Did change from SD card to SSD few years back for my home assistant setup (now running with a mini pc) at the time I went for a geekpi adapter (can’t recall exact model).

Try a quick ducduck search “sata adapter #yourOS#” and see if a list come up. Here is one for HA (but surely more models are compatible than the ones listed here) https://community.home-assistant.io/t/working-usb-enclosures-and-adapters-with-hassos/212763

Edit: as for SSD, I went for Samsung EVO model

Sidenote: all SSD will be more reliable than a sd card because they are less sensitive to rewrite counts

I don’t see why you think those are web based, usually people run this at home but glad you find what you are looking for

As far as photo librabry, you can compare the different solutions at https://github.com/meichthys/foss_photo_libraries

You definitely needs to calibrate your estep and flow rate as others mentioned. If numbers were correct then you might have a partial clog. If so, clean it and check Luke’s hotend fix on thingiverse/printable (really worth it). https://m.youtube.com/watch?v=7tCxO17XZtw

Under extrusion aside, you can get better text details by using a smaller nozzle as one issue for the text clarity is line width, while it isn’t ideal you can also try to set 0.30/0.35 line width with 0.4 nozzle.

Also, if you do plug in usb from your computer to printer (to calibrate estep), make sure to cover the 5v pin on usb cable with electrical tape. Otherwise you might wreck your printer mainboard. https://community.octoprint.org/t/put-tape-on-the-5v-pin-why-and-how/13574

Redlib ?

Relying on 4 nvme drive for low power isn’t ideal as nvme drive needs about twice more power compare to sata SSD.

On your Xiaomi first time you launched app, you can determine wether you always allow or allow on prompt (but you should still be able to manage that setting afterwards). You also need to disable battery optimization for that app and set app to be able to auto launch in background. This is at least what I do with my home assistant app to determine GPS location in background (app record every 15mn) and no issues with battery draining.

Give it a shot, description from fdroid says it supports subtitle download.

Long time I haven’t used it but nova video player should do it

They do have hub (probably pi like hub) with ZigBee and/or zwave but best to use a small nuc (or similar) and get a ZigBee dongle. Will be a bit more expensive but worth it. Have no idea about pricing for subscription service but I’m not sure they can even match the power of home assistant automation capabilities.

A complete and affordable setup that will merge anything you want inside a single app will be by using home assistant. But while it is much easier to setup and maintain than a few years ago, selling the house will require new owner to have a few tech knowledge. You also have to make sure that your setup is designed to be used by all family whatever there age and knowledge (and it isn’t always simple)

Describing everything available that would make it a perfect place will take a very very long comment but here are some hint, look at ethernet cameras instead of wifi, ZigBee and zwave instead of wifi for most of the devices as those protocols are designed for smart homes unlike wifi, use as less as possible cloud base solution.

As a starter, you can check for temperatures/humidity sensors, contact sensors for doors/windows, automated curtains, switches, presence detection, lights, leak detectors, weather station, energy monitoring,…

https://www.home-assistant.io/

Don’t have particular case to recommend as the one I have has been printed but get one where you can add an SSD. SD card are not well suited for home assistant due to the amount of overwriting.

It is a good voice assistant but it isn’t an ai voice assistant, Also only works for your home assistant devices/entities unless you link it to gpt