As well, EV’s lose very little of their energy to heat or other losses between the battery and wheels unlike ICE vehicles. The result is drag plays a more significant percentage of where the energy is “going”, so the impact of higher speeds on range is greater then it is for ICE vehicles.
Just to be clear, he absolutely wasn’t going hiking but to some sort of BDSM event.
Respectfully, did you read the article? They’re talking about NFC increasing the range from ~5mm to 30mm. It’s not about competing with Bluetooth use cases, it’s about an improvement in the user experience with contactless payments and door access, etc.
Lemmy has grown a lot in the past week, it’s now far larger then ever, and the result is the large instances are having performance issues. Lemmy.ml specifically has been, as far as I can tell from my own instance, constantly behind and missing sending or receiving data to other instances.
I know the devs are specifically working on performance improvements using the data they’ve gathered from the increased traffic.
The game is probably CPU bound not GPU bound, based on past bethesda games. If that is the case, decreasing the resolution will not necessarily increase the frame rate a proportional amount.
I believe that is correct.
Not quite the case.
When a user on instance B subscribes to a community on instance A, instance A begins to send in real-time the posts and comments of that community to B, which keeps a local copy of that community.
If instance B has 10 active users subscribed to that community on A, they’re all loading it from instance B. The end result is instance A only had to share each piece of content once with instance B, and instance B further shares it with the ten local subscribers, reducing the load on instance A.
The only exception is when instance B only has a single subscriber to instance A’s community, in which case replicating the entirely of the community is more work then that user just browsing it directly on instance A.
Tl;dr it’s most efficient for a large Lenny instance if most of its active users are on other instances.
If a large corp wants to do what you’re suggesting, they don’t need to launch a big announced project.
They can spin up a federated instance with just one user and no references to who owns it, then have patsy accounts on other instances subscribe to their instance and get all the data they want sent to their semi secret instance.
It would be very difficult to identify this in a large, healthy federation with tons of users and lots of small personal instances.
In the US, with slander and libel, there are two standards.
If someone is a public figure, they need to show actual damages in order to be successful, this is the scenario you’re describing.
If you are not a public figure, then you can sue for slander or libel without needing to show actual damages, just harm to your reputation or similar.
So the answer on that turns on whether Christian Selig is a public figure or not - I do not know the answer to that question.
Super cool approach. I wouldn’t have guessed it would be that effective if someone had explained it to me without the data.
I’m curious how easy it is to “defeat”. If you take an AI generated text that is successfully identified with high confidence and superficially edit it to include something an LLM wouldn’t usually generate (like a few spelling errors), is that enough to push the text out of high confidence?
I ask because I work in higher ed, and have been sitting on the sidelines watching the chaos. My understanding is that there’s probably no way to automate LLM detection to a high enough certainty for it to be used in an academic setting as cheat detection, the false positives are way too high.
Thank you for the answer.
Any suggestions on further reading?
Not sure then, sorry :/
Yeah. Did you down and up the docker and see if the issue is resolved?
Does your docker network setup have the lemmy server on an internal network with no external access? The default docker config is setup that way and caused what you’re describing for me. Fastest fix is comment out the “internal: true” from the docker compose file, but you may want to consider the security implications of that.
Mostly I am depending on reverse proxy yes.
Otherwise there’s not critical data on the box that could cause a problem for me if the server was owned and everything exfiltrated. Worst case if I had to completely wipe the box it would be annoying but not worse then that.
Interesting article, thank you for sharing.
I almost stopped reading at the octopus analogy because I think it’s pretty obviously flawed and I assumed the rest of the article might be, but it wasn’t.
A question I have. The subject of the article states as fact that the human mind is much more complex and functions differently then an LLM. My understanding is that we still do not have a great consensus on how our own brains operate - how we actually think. Is that out of date? I’m not suggesting we are all fundamentally “meat LLM’s”, to extremely simplify, but also I wasn’t aware we’ve disproven that either.
If anyone has some good reading on the above to point to I’d love to get links!
Raspberry Pi 4 running home assistant
Intel NUC running frigate and a minecraft server
Custom built PC (i3-10100, 16gb ram, GTX1070 for transcoding. 24tb array with two parity disk, 2x 3tb ssd’s in array for docker, os, etc) with quite a lot of storage running Unraid, which is my media server, backup server, and now my lemmy server.
Network is a mikrotik Hex S router and a netgear gigabit switch, with 1gb fiber internet. 2 Ubiquity AP’s for wifi in the house.
Good idea. I went and doublechecked my settings, and both for my profile and for the instance settings both undetermined and english are highlighted, so unfortunately that wasn’t it. Thank you though.
It’s probably on my end since I just put this instance up, but hard for me to pinpoint since other instances are working, just lemmy.ml that is not.
Topic I know about: I worked for ECCO corporate for about 7 years, and have a pair of Ecco shoes I made myself. I no longer work there.
A well fit pair of ECCO’s can last multiple years. They genuinely do try and make quality shoes and there’s a lot of work done to keep the materials and manufacturing processes producing high quality shoes.
That being said, any shoe made with a polyurethane sole (like ECCO and most shoes nowadays) will not last for a lifetime. Polyurethane is a great material but not a lifetime material. The only shoes which could qualify as buy it for life material are ones with leather soles, but they require occasional resoleing, so are a ship of thesus sort of affair. A pair of ECCO’s lasting 5 years is a reasonable goal but not one always attained.
You say you were wearing them everyday - this will decrease the overall lifetime of a pair of shoes. Your feet sweat and the inside gets wet, the leather uppers benefits from being allowed to dry out. Conversely, any shoes you own with polyurethane soles must be worn occasionally (a few times a year minimum) or the soles will harden and then crack and fall apart when being worn. ECCO used to get a lot of angry feedback from customers that bought expensive dress shoes only to wear to a wedding once a year, and they fell apart after only having been worn 2-4 times. You are best owning 2-4 pairs of shoes that you rotate through day to day, this will extend the life of all of them longer, so you will spend less overall (but need to start by buying multiple pairs). I would get pairs from different companies so you can compare how long they last and which you find are most comfortable for your feet. Some other companies that are in the same price and quality range as ECCO would be Cole Haan, Clarks, Timberland and Rockport. One of them might fit you much better then Vans or ECCO or whatever.
Finally, a good fit is key. If the shoe is too small, or just not the right shape for your foot, then whatever part of the shoe your foot is pushing against will wear out much faster then the rest of the shoe. This is actually a problem I have with ECCO’s personally. My feet are wide just behind my toes, and my shoes always fail right there where my foot is stretching the leather more then elsewhere, earlier then they would if they fit me better. Seeing how I was getting free and/or deeply discounted shoes, I was ok with this.
Shoe manufacturers use a form called a “last” when they manufacture shoes, the last determines the shape and fit of the shoe. Different companies have different lasts based on their own research and goals for fit and the kinds of customers they’re targeting. It may be that Van’s uses a last shape that doesn’t match up with your foot shape very well. Perhaps ECCO’s will fit you well, perhaps not at all.
If you’re in the US, ECCO runs sales every other month or so when the already on-sale shoes will be discounted another 30-40% (I just looked and they’re having one now…). You can pick up a pair for $100-150 pretty easily. Usually around holidays at a minimum. Keep an eye out on their website, and get a pair pretty cheap during a sale. Or, check out of there is an outlet near you, the outlets have legitimately low prices, especially on the clearance wall, though usually those shoes are also ugly AF which is how they end up there.
Anyone has questions about shoe production or ECCO, I’d be happy to answer. They make pretty good shoes and run their own, non sweatshop factories, so I do recommended the shoes. Their US office is run by a few complete idiots though so I don’t recommend working there.